Plan your space
Confirm the heating/cooling load, clearances and mounting surface.
Also available on Amazon
12,000 BTU · Up to 650 sq ft
Hartwell Air 12,000 BTU solar air conditioner. Solar-ready heating and cooling for a cabin, garage, tiny home or a single living space.
In stock
| Capacity | 12,000 BTU |
|---|---|
| Coverage guide | Up to 650 sq ft |
| Efficiency | Up to 22 SEER2 |
| Operating mode | Heating + cooling |
| Solar kit panel count | None with Unit Only |
| Warranty | 5-year compressor and parts warranty (written terms apply) |
| Shipping | Shipping charges apply; estimated delivery in 2–10 business days |
Floor area alone can’t predict heating or cooling load. Verify fit, electrical supply, mounting and equipment clearances.
For RVs, check moving-vehicle mounting and roof suitability, including travel loads and vibration.
Confirm the heating/cooling load, clearances and mounting surface.
Secure the indoor head and outdoor unit. A window unit uses its compatible window mounting components instead.
For split systems, route the factory-precharged lines and drain. Never cut or re-flare precharged lines.
Mount panels securely and connect within the unit’s documented DC voltage and current limits. Keep connectors de-energized while working.
Match the AC circuit, wiring and protection to the model’s electrical requirements.
Follow the model’s commissioning and safety instructions, check drainage, connect Wi-Fi and call us with questions.
It is a ductless heating and cooling system with a direct solar DC input and a compatible AC backup input.
Available sunlight offsets the electricity the system needs.
Equipment and remote, your choice of 450W black-on-black bifacial rigid panels with aluminum mounting rails, mid clamps, end clamps, roof attachment feet and grounding clips, or 300W flexible panels with adhesive mounting and no racking.
Both kits include 50 feet of MC4 cable, MC4 connectors, M-1 Universal Adhesive & Sealant, HVAC pad, 3-inch hole saw, solar and AC disconnect switches, AC wiring cable, sealing putty, line-set wall-hole cover and drain tube.
Panel counts and included equipment depend on the model and selected panel type.
Multi-zone systems do not include line sets, even with a Complete Kit. Professional installation is recommended for multi-zone systems.
Call us to configure line sets for your system.
Precharged lines simplify the mechanical connection.
Follow the exact model’s installation instructions and never open or modify the sealed refrigerant circuit.
Not for direct solar operation while sufficient sunlight is available.
For cooling after sunset, use compatible grid power, generator power or a correctly designed battery/inverter system.
A suitably sized generator with compatible voltage, frequency and power quality may work.
Operate generators outdoors away from openings and follow all carbon-monoxide safety instructions.
No. Square-foot guidance is approximate and assumes appropriate conditions.
A load calculation and matched-system documentation determine suitability.