DIY Solar Mini Split Installation: Planning Guide
Plan a DIY solar mini split installation: mounting, drainage, model-specific connections, solar input checks and startup.
Download the right manual.
By Solar Powered Mini Splits · Updated
Quick answer
Plan the exact model, mounting, drainage, connection route, solar input and any compatible backup before starting a DIY solar mini split installation.
Read the matching manual before drilling or connecting anything.
The illustrated installation walkthrough is specific to the 12,000 BTU model; its connection method and electrical requirements must not be assumed to apply to every system.
A DIY kit simplifies equipment selection, but it does not make every wall, roof, room or power source suitable.
This planning guide helps you organize the work and recognize when a question needs answering before the next step.
The supplied instructions for the exact equipment control clearances, connections, electrical limits, startup and maintenance.
Start with the live product page and its document downloads.
Keep the model identity visible throughout planning rather than relying on a general video or a similar-looking unit.
If supplied parts or instructions differ from what you expected, stop and contact support.
Changing the plan is safer than improvising a connection around an assumption.
Confirm the model and the purchase option
The 12K and 24K mini splits share the supplied installation and owner’s manual in their download sections.
The detailed illustrated 12K walkthrough uses the supplied DIY installation guide for that model.
Read the correct documents together and ask about any uncertainty instead of extending a step to other capacities.
The window AC has its own specification sheet and is self-contained. It has no field refrigerant line-set connection.
The multi-zone system needs separate planning: line sets are not included in either purchase option, and professional installation is recommended.
Call if you need line sets configured for its selected heads.
| Equipment | Document starting point | Important distinction |
|---|---|---|
| 12K mini split | Linked installation documents and illustrated 12K walkthrough | Keep walkthrough instructions specific to this model |
| 24K mini split | Shared installation and owner’s manual linked on its page | Confirm its own connections and electrical requirements |
| 36K multi-zone | Multi-zone and multi-head installation documents | Line sets not included; selected layout matters |
| 12K window AC | Window model specification sheet | Self-contained; no split-system line-set procedure |
Check the box before committing to the layout
Compare the selected option’s contents with the product listing. Unit Only does not include solar panels.
Complete Kits offer rigid 450W panels with roof racking or flexible 300W panels with adhesive. Counts vary by model and panel type.
Contents and representative pictures do not replace the electrical review for the complete array.
Lay out the relevant documents and identify the connections described for your model.
Keep labels, purchase information and any installation notes together. If something is missing or unfamiliar, ask before mounting around it.
A clear inventory makes a support conversation more useful and avoids discovering late in the work that the planned route relies on an unconfirmed part.
Plan locations, structure and service access
Choose an indoor location and an outdoor base that can safely support the equipment.
Use the documented airflow and service clearances; do not squeeze a unit into a tight space because it looks tidy.
Plan where connections will pass through the wall and how they will reach the outdoor unit without sharp bends or accidental damage.
Check the whole route before making a hole
Locate hidden wiring, plumbing and framing before cutting.
The 12K walkthrough starts with an outside wall, a strong flat outdoor base and a clear route for the tubes and water drain.
Check the connection reach against the matching instructions before positioning equipment.
Do not assume a supplied connection package can reach any convenient location.
Mounting panels is a separate structural question. Confirm the surface, mounting method and exposure against the panel instructions.
Adhesive alone is not suitable for every surface. For RV use, consider travel loads and vibration as well as the parked position.
The RV, cabin and shed guide explains why the structure needs its own review.
Make drainage part of the original layout
Plan a water-drain route with the slope required by the manual.
Avoid kinks and locations where discharged water could cause damage or create a problem along a walkway.
A unit location is not fully planned until condensate can leave safely.
Do not treat the drain as something to solve after the equipment and connection route have been fixed.
The 12K walkthrough keeps the water-drain hose at the bottom of the wall opening and routes it downhill.
Keep this instruction attached to that model’s sequence.
After arranging the route, check that insulation, supports or other connections will not crush the hose or force it into an unsuitable position.
Follow the manual’s check before moving on.
Use the model-specific indoor mounting sequence
The illustrated 12K guide removes and levels the wall plate, marks its fixing locations, checks the wall and then prepares the opening.
It describes a test hole before cutting further so hidden services and framing can be checked.
Wear the protection specified for the work, and stop if the structure does not match the proposed mounting plan.
Do not confuse a supplied tool with the manual’s dimension
The Complete Kit includes a 3-inch hole saw, but the supplied 12K DIY manual specifies a 2.5-inch wall opening.
The tool included in the bundle does not revise that instruction.
Call before drilling if you do not have the matching size or are unsure how to follow the model’s requirements.
Do not turn this distinction into a general dimension for other units.
The 12K sequence supports the short copper tubes while gently turning them, passes the connections through the opening and hangs the indoor unit on its plate.
Avoid sharp bends or flattening the tubes.
Get help supporting the equipment as directed rather than using the tubing as a handle or allowing the connections to carry the unit’s weight.
Connect only as the matching instructions describe
For the illustrated 12K procedure, matching supplied tube connectors are joined by hand until the halves meet without a gap.
That guide says not to use a wrench or cut the tubes.
This is a model-specific instruction, not permission to use a hand-tighten procedure on any refrigerant fitting or any other mini split.
Never open or modify a sealed refrigerant circuit.
Follow the exact equipment instructions for its supplied connections and stop if they do not match the documented method.
The multi-zone system has separate line-set requirements and documents.
Do not carry the single-zone illustration over to a different connection type because the fittings seem similar.
Insulate, support and weather-seal the route
The 12K walkthrough covers the tube connections with their foam and tape, then routes the tubes gently and secures them without crushing.
It also describes the model’s control-cable plug and locking ring. Follow the sequence for the actual components and maintain the drain route.
Check weather sealing without hiding an unresolved connection or a kinked hose.
Review the solar array before connecting it
Confirm the panel labels, the unit’s permitted DC voltage and current, connector compatibility, polarity and cable route.
Kit panel quantity is not a wiring plan.
The 12K installation illustration shows a simplified panel connection example; it must not be copied as the full arrangement for the current six-panel kit without verification.
Read the panel-count and compatibility guide, then ask support to review the complete set of panels you intend to use.
A larger array is not automatically safe.
Do not add panels or change a connection arrangement merely to chase a longer operating period without checking the equipment’s limits.
Use isolation and the DC disconnect correctly
Solar panels can generate hazardous DC voltage in daylight.
Follow the instructions for isolation and keep the disconnect in the specified state during the connection sequence.
The 12K walkthrough connects the unit and panels to the designated sides of its disconnect, then switches it on only after connections are complete.
Never unplug solar connectors while power is flowing.
Check backup requirements and the startup sequence
Grid power is optional when sufficient solar can meet demand.
If an AC source is connected, it must meet the exact model’s electrical requirements.
Do not copy the 12K walkthrough’s supply details onto the 24K, multi-zone or window model.
A familiar-looking outlet or a claimed generator rating is not enough to establish compatibility.
Before startup, review mounting, clearances, drainage, connections and the panel plan against the documents.
Follow the documented startup checks rather than inventing a universal switch-on sequence.
These kits do not include battery storage, so operation at night or with insufficient sunlight needs another compatible source.
Plan this before relying on the space for required comfort.
Keep a useful handover and maintenance record
Retain the model documents, purchase record and installation notes.
Follow the maintenance instructions for filters, outdoor airflow and the drain route.
If operation changes, use documented troubleshooting and contact support rather than altering safety devices or electrical components.
Photographs taken during planning can help explain the installation without dismantling anything.
The HVAC warranty covers the compressor and parts for five years under the written terms.
Read the warranty policy; do not assume it covers every site-specific installation issue or promises a solar yield.
For the purchase comparison, see solar versus regular mini split costs and savings.
Installation planning FAQ
Can I use the 12K walkthrough for every model?
No. It is specific to the 12,000 BTU model.
Use the matching equipment documents for connections, clearances, electrical requirements and startup.
Are multi-zone line sets included?
No. Neither Unit Only nor Complete Kit multi-zone options include line sets.
Professional installation is recommended; call to configure line sets for your system.
Does the included hole saw change the 12K manual?
No. The kit includes a 3-inch hole saw, while the supplied 12K DIY manual specifies a 2.5-inch opening.
Contact support before drilling if you need clarification or the matching tool.
Choose your system with real Phoenix support
Shop solar mini splits and Complete Kits, call (623) 400-6077, or text our Phoenix team.
Send your measurements and questions before ordering so we can help you check the model, solar plan and installation documents.
